{"product_id":"pid-hydrocarbon-detector-mh2000-cxhy","title":"PID Hydrocarbon Detector - PPM and PPB Sensor Options","description":"\u003cp\u003eThe MH2000-CxHy is a portable PID hydrocarbon detector with an internal sampling pump and a choice of PPM or PPB sensor configuration. PPM options cover 0-100, 0-200, 0-1000, 0-2000 and 0-3000 ppm. PPB options cover 0-10 and 0-50 ppm with 0.001 ppm (1 ppb) resolution.\u003c\/p\u003e\u003ch3\u003ePID Measurement and Range Selection\u003c\/h3\u003e\u003cp\u003ePhotoionization detection responds to compounds that can be ionized by the installed lamp. A hydrocarbon-vapor reading therefore depends on the compounds present, the lamp configuration and the calibration basis. For a specific compound or known mixture, confirm target compatibility and the appropriate calibration basis before ordering.\u003c\/p\u003e\u003cp\u003eWhen several detectable compounds are present, the displayed result reflects their combined PID response. The instrument does not identify the individual components of a mixture. Interpret readings using the calibration and response information appropriate to your target vapor.\u003c\/p\u003e\u003cp\u003eChoose the sensor configuration and one measurement range when ordering. The PPB configuration provides 0.001 ppm reading increments for its two lower concentration ranges. PPB identifies the sensor configuration; the range values are expressed in ppm. Resolution describes the reading increment and is distinct from measurement accuracy or a detection limit.\u003c\/p\u003e\u003cp\u003eEach detector is supplied with its selected configuration and full scale. Select a range that covers your expected concentrations and suits the reporting requirements of your procedure.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSensor configuration\u003c\/th\u003e\n\u003cth\u003eOrdering ranges\u003c\/th\u003e\n\u003cth\u003eReading resolution\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePPM\u003c\/td\u003e\n\u003ctd\u003e0-100, 0-200, 0-1000, 0-2000, 0-3000 ppm\u003c\/td\u003e\n\u003ctd\u003eRange-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePPB\u003c\/td\u003e\n\u003ctd\u003e0-10, 0-50 ppm\u003c\/td\u003e\n\u003ctd\u003e0.001 ppm (1 ppb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSampling and Alarm Controls\u003c\/h3\u003e\u003cp\u003eAdjust the internal pump through ten suction settings, with a maximum flow of 1 L\/min. The LCD dot-matrix display shows gas type, concentration, unit, battery status and time, with English and Chinese interface options.\u003c\/p\u003e\u003cp\u003eTwo alarm stages have adjustable set points. Sound, light and vibration provide alarm indications, including an audible alarm rated at 85 dB. Temperature and pressure compensation, self-check, zero calibration and factory reset controls support instrument setup. Follow the supplied instructions for calibration, checks and alarm handling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eMH2000-CxHy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement configuration\u003c\/td\u003e\n\u003ctd\u003eCxHy hydrocarbon vapors detectable by the configured PID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor principle\u003c\/td\u003e\n\u003ctd\u003ePhotoionization detection (PID)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor configuration\u003c\/td\u003e\n\u003ctd\u003ePPM or PPB, selected when ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement range options\u003c\/td\u003e\n\u003ctd\u003ePPM: 0-100\/200\/1000\/2000\/3000 ppm; PPB: 0-10\/50 ppm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePPB reading resolution\u003c\/td\u003e\n\u003ctd\u003e0.001 ppm (1 ppb), for 0-10 and 0-50 ppm PPB configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSampling method\u003c\/td\u003e\n\u003ctd\u003eInternal pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pump flow\u003c\/td\u003e\n\u003ctd\u003e1 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump adjustment\u003c\/td\u003e\n\u003ctd\u003e10 suction settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLCD dot-matrix display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplayed information\u003c\/td\u003e\n\u003ctd\u003eGas type, concentration, unit, battery status and time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface languages\u003c\/td\u003e\n\u003ctd\u003eEnglish and Chinese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm indications\u003c\/td\u003e\n\u003ctd\u003eSound, light and vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudible alarm\u003c\/td\u003e\n\u003ctd\u003e85 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm stages\u003c\/td\u003e\n\u003ctd\u003eTwo stages with adjustable set points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement compensation\u003c\/td\u003e\n\u003ctd\u003eTemperature and pressure compensation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstrument controls\u003c\/td\u003e\n\u003ctd\u003eSelf-check, zero calibration and factory reset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003e3.6 V, 2300 mAh rechargeable lithium-polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging time\u003c\/td\u003e\n\u003ctd\u003eApproximately 4-6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-20 to 50 Degree C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating humidity\u003c\/td\u003e\n\u003ctd\u003e0-95% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress protection\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing material\u003c\/td\u003e\n\u003ctd\u003eEngineering plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e205 x 75 x 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate instrument weight\u003c\/td\u003e\n\u003ctd\u003e300 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData functions\u003c\/td\u003e\n\u003ctd\u003eData logging and PC export optional; excluded from base configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCharging and Supplied Package\u003c\/h3\u003e\u003cp\u003eThe detector uses a 3.6 V, 2300 mAh rechargeable lithium-polymer battery. Charging takes approximately four to six hours. The engineering-plastic housing is rated IP65 and measures 205 x 75 x 32 mm; instrument weight is about 300 g.\u003c\/p\u003e\u003cp\u003eSupplied items are one detector, a charging\/data cable, an instruction manual and an aluminum carrying case. Data logging and PC export are optional and excluded from this base configuration.\u003c\/p\u003e\u003cp\u003eImages show the shared series housing. Demonstration screen labels and readings may differ from the supplied CxHy configuration, and the carrying-case photograph does not indicate a two-detector package.\u003c\/p\u003e","brand":"Mcooh","offers":[{"title":"PPM \/ 0-100 ppm","offer_id":67806901796907,"sku":"GAS-L6Q9-01","price":2469.37,"currency_code":"USD","in_stock":true},{"title":"PPM \/ 0-200 ppm","offer_id":67806902222891,"sku":"GAS-L6Q9-02","price":2469.37,"currency_code":"USD","in_stock":true},{"title":"PPM \/ 0-1000 ppm","offer_id":67806902255659,"sku":"GAS-L6Q9-03","price":2547.51,"currency_code":"USD","in_stock":true},{"title":"PPM \/ 0-2000 ppm","offer_id":67806902288427,"sku":"GAS-L6Q9-04","price":2547.51,"currency_code":"USD","in_stock":true},{"title":"PPM \/ 0-3000 ppm","offer_id":67806902321195,"sku":"GAS-L6Q9-05","price":2547.51,"currency_code":"USD","in_stock":true},{"title":"PPB \/ 0-10 ppm","offer_id":67807186944043,"sku":"GAS-L6Q9-06","price":2796.33,"currency_code":"USD","in_stock":true},{"title":"PPB \/ 0-50 ppm","offer_id":67807186976811,"sku":"GAS-L6Q9-07","price":2796.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0273\/2133\/5851\/files\/pid-hydrocarbon-detector-front.jpg?v=1791618914","url":"https:\/\/mcooh.com\/products\/pid-hydrocarbon-detector-mh2000-cxhy","provider":"Mcooh","version":"1.0","type":"link"}