Sulfur Dioxide Detector for Biogas - 0-5000 ppm
Sulfur Dioxide Detector for Biogas - 0-5000 ppm - 0-5000 ppm Free standard shipping to supported destinations. See the shipping policy for preparation and transit estimates.
Need help choosing? Tell us what you need to measure.
Shipping & returns
Shipping & returns
Free standard shipping is available to supported destinations. Delivery time includes order preparation and transit and varies by destination. See our shipping policy for current delivery estimates and availability.
See our return policy for return conditions. For an order-specific delivery question, contact Mcooh.
Sulfur Dioxide Detector for Biogas - 0-5000 ppm - 0-5000 ppm Free standard shipping to supported destinations. See the shipping policy for preparation and transit estimates.
Choosing the right instrument?
Tell us your measurement range, material or target, and operating conditions.
Description
Description
This MH2000-SO2 detector is configured to measure sulfur dioxide in biogas applications over a 0-5000 ppm range. It uses an electrochemical sensor and an internal sampling pump. The High Performance sensor configuration includes interference resistance for its biogas-specific application and is supplied as a single-gas SO2 instrument.
SO2 Measurement in a Biogas Configuration
The measured gas is sulfur dioxide. This instrument does not establish measurement of methane, carbon dioxide, hydrogen sulfide or a complete biogas composition. Select it when the measurement procedure calls for SO2 within the stated 0-5000 ppm span.
A separate flue-gas-specific SO2 option also has a 0-5000 ppm range. The two configurations serve different applications, so the shared span does not make them interchangeable. Interference resistance identifies the selected sensor configuration and does not guarantee complete immunity to every interfering gas.
Portable Sampling and Readings
The internal pump delivers up to 1 L/min flow and has ten adjustment settings. The LCD dot-matrix display shows the gas type, concentration, unit, battery level and time. English and Chinese operating interfaces are available. Concentration units include μmol/mol, ppm and mg/m³.
The housing measures 205 x 75 x 32 mm and weighs 300 g. It uses a 3.6 V, 2300 mAh rechargeable lithium-polymer battery, with a charging time of 4-6 hours. Filters, drying accessories and probes are separate sampling-package choices.
Specifications
| Item | Specification |
|---|---|
| Model | MH2000-SO2 |
| Detected gas | Sulfur dioxide (SO2) |
| Configuration | High Performance, biogas-specific, single-gas |
| Measuring range | 0-5000 ppm |
| Interference resistance | Interference-resistant sensor configuration for biogas SO2 measurement |
| Measurement scope | SO2 only; not a multi-gas biogas analyser |
| Sensor principle | Electrochemical |
| Sampling method | Internal sampling pump |
| Pump flow | Up to 1 L/min |
| Pump adjustment | 10 settings |
| Display | LCD dot matrix; gas type, concentration, unit, battery level and time |
| Operating languages | English and Chinese |
| Concentration units | μmol/mol / ppm / mg/m³; 1 μmol/mol = 1 ppm |
| Alarm outputs | Sound, light and vibration |
| Alarm stages | Two |
| Alarm setpoints | User adjustable |
| Sound alarm | 85 dB |
| Alarm lights | Blue for low alarm; red for high alarm |
| Measurement compensation | Temperature and pressure compensation |
| Instrument controls | Self-check, zero calibration and factory reset |
| Battery | 3.6 V, 2300 mAh rechargeable lithium polymer |
| Charging time | 4-6 hours |
| Operating temperature | -20°C to 50°C |
| Operating humidity | 0-95% RH, non-condensing |
| Protection rating | IP65 |
| Dimensions | 205 x 75 x 32 mm |
| Instrument weight | 300 g |
| Data recording / PC export | Optional; excluded from this base configuration |
Alarm and Recording Choices
Two alarm stages allow the setpoints to be adjusted. Sound, light and vibration provide the outputs, including an 85 dB sound alarm and blue/red alarm lights. Temperature and pressure compensation, self-check, zero calibration and factory reset are provided for setup. Follow the supplied instructions for the biogas-specific SO2 configuration and sampling arrangement.
Data logging and PC export are optional and excluded from this base configuration. Gallery photographs illustrate the shared housing. Screen readings are illustrative, and the carrying-case image does not represent two supplied instruments or establish included PC export.
