AC/DC Hipot Tester – 0–10 kV, MCH-2672B
AC/DC Hipot Tester – 0–10 kV, MCH-2672B - 110V Free standard shipping to supported destinations. See the shipping policy for preparation and transit estimates.
Need help choosing? Tell us what you need to measure.
Shipping & returns
Shipping & returns
Free standard shipping is available to supported destinations. Delivery time includes order preparation and transit and varies by destination. See our shipping policy for current delivery estimates and availability.
See our return policy for return conditions. For an order-specific delivery question, contact Mcooh.
Choosing the right instrument?
Tell us your measurement range, material or target, and operating conditions.
Description
Description
MCH-2672B AC/DC Withstand Voltage Tester
The MCH-2672B applies an adjustable AC or DC test voltage up to 10 kV for dielectric withstand testing. It displays the applied voltage, leakage current and test time together, helping technicians assess a test against the limits set for the equipment under inspection.
Adjustable leakage-current settings and a timed test interval support repeatable checks of electrical products and insulating assemblies. High-voltage breakdown protection and audible and visual over-limit indications are built into the instrument.
Test Ranges and Timing
| Parameter | Specification |
|---|---|
| Output voltage | AC/DC: 0–10 kV |
| Leakage-current ranges | AC: 0–2 / 0–20 mA; DC: 0–2 / 0–10 mA |
| Rated output power | 100 VA |
| Timed test | 1–99 s, ±5% |
| Additional control modes | Manual and remote control |
| Voltage indication accuracy | ±5% of displayed value |
| Current indication accuracy | ±5% of displayed value |
| AC test waveform | 50 Hz mains-derived sine wave |
Select the Mains Version
Choose the 110 V or 220 V input version to match the installation. The input specification is ±10% of the selected nominal voltage at 50 Hz ±2 Hz. The mains version is a separate choice from the adjustable high-voltage test output.
This instrument is intended for controlled high-voltage testing by trained personnel using the supplied instructions and the applicable test procedure. Set the test voltage, leakage-current limit and duration for the particular product being tested.
Included Equipment
- MCH-2672B withstand voltage tester
- High-voltage test lead set
- Power cord
- User manual
