Bench Power Supply CV vs CC: Set Voltage and Current Limits Correctly
By Mcooh Team
Understand why a bench power supply changes between CV and CC, and set voltage and current limits for a known test load.
Read moreMeasurement Guides
Explore practical comparisons and selection checks across electrical, optical and flow measurement.
A useful starting point
How to Choose a Digital Water Flow Meter for a Pipe SystemChoose a digital water flow meter by matching its sensor, usable flow range, connection, and readout to the actual line.
-
-
How Much Oscilloscope Bandwidth Do You Need? Include the Probe
By Mcooh Team
Choose oscilloscope bandwidth from the waveform details you need to see, then check the probe and input as one measurement system.
Read more -
Hot-Water Flow Meter Selection: Check Temperature, Pressure, and Sensor Fit
By Mcooh Team
Select a hot-water flow meter by checking the complete sensor assembly against the loop's heat, pressure, and flow range.
Read more -
Flow Meter Accuracy and Straight Pipe Length: Diagnose an Installed Reading
By Mcooh Team
Check flow meter accuracy by tracing nearby fittings, straight pipe space, operating range, and other causes of odd readings.
Read more -
How to Choose a Digital Water Flow Meter for a Pipe System
By Mcooh Team
Choose a digital water flow meter by matching its sensor, usable flow range, connection, and readout to the actual line.
Read more -
Signal Generator vs Frequency Counter: Source, Measure, or Both?
By Mcooh Team
Compare a signal generator and frequency counter by signal direction, test purpose, input limits, and combined-unit capabilities.
Read more -
Signal Generator 50-Ohm Output Impedance: Why the Voltage Reading Changes
By Mcooh Team
Understand how a 50-ohm generator output and the connected load affect the voltage actually delivered to your circuit.
Read more -
SCI vs SCE Color Measurement: Which Specular Setting Fits QC?
By Mcooh Team
Compare SCI and SCE color readings on glossy samples, then choose a consistent specular setting for your quality-control method.
Read more -
RF Signal Generator Buying Guide for Receiver and Bench Tests
By Mcooh Team
Choose an RF signal generator by matching its carrier range, usable output, and modulation to the test you actually run.
Read more -
Handheld Spectrophotometer Buying Guide for Color QC
By Mcooh Team
Choose a handheld spectrophotometer by matching its optics, aperture, settings, and data workflow to your actual samples.
Read more -
D/8 vs 45/0 Color Measurement Geometry: What Changes in QC?
By Mcooh Team
Compare d/8 and 45/0 color measurement methods to choose a consistent QC setup for glossy, matte, and textured samples.
Read more -
How to Choose a Colorimeter Aperture Size for Real Samples
By Mcooh Team
Choose a colorimeter aperture size by testing the smallest usable patch, surface texture, and instrument contact on real samples.
Read more
Need help choosing an instrument?
Tell us what you need to measure, the range and the application. You can also browse our measurement guides.