Test & measurement instruments

Programmable DC Power Supply DPH8920 96V 20A

Mcooh  |  SKU: PWR-UZ9Z-04
$191.21 USD
Free standard shipping to supported destinations. Taxes calculated at checkout.
Model

Need help choosing? Tell us what you need to measure.

Shipping & returns

Free standard shipping is available to supported destinations. Delivery time includes order preparation and transit and varies by destination. See our shipping policy for current delivery estimates and availability.

See our return policy for return conditions. For an order-specific delivery question, contact Mcooh.

Choosing the right instrument?

Tell us your measurement range, material or target, and operating conditions.

Ask a selection question

Description

DPH8920 Programmable DC Buck Power Module

The DPH8920 series is a DC-input programmable buck power module with a 20-110 V DC input and 0-96 V adjustable output. The DPH8920 variants support up to 20 A and 1920 W. Actual output depends on the input source, load, and cooling conditions; do not assume maximum voltage, current, and power are available simultaneously.

Input requirement: this product requires an appropriate DC source within the specified input range. It is not designed for direct connection to AC mains. Confirm the required DC input source and complete package before ordering.

Choose the DPH8920 Version

Variant SKU Wired communication Wireless control Included control accessories
DPH8920 INS06-PS3321 TTL serial No RF remote Module and USB-to-TTL communication cable
DPH8920-RF INS06-PS3319 TTL serial RF remote control Module, remote control, remote charging cable, and USB-to-TTL communication cable
DPH8920-485 INS06-PS3322 485 interface No RF remote Module and USB-to-485 module
DPH8920-485RF INS06-PS3320 485 interface RF remote control Module, remote control, remote charging cable, and USB-to-485 module

RF features apply only to variant names containing RF. Choose the TTL or 485 communication version required by the host system. PC control supports SIMPLE and MODBUS communication through the applicable interface; confirm software compatibility, drivers, and protocol details for the selected variant.

DPH8920 Specifications

Input voltage 20-110 V DC
Output voltage 0-96 V
Output current 0-20 A
Output power 0-1920 W
Voltage resolution 10 mV
Current resolution 10 mA
Display accuracy 10 mV, 10 mA

DPH8920 and DPH8909 Comparison

Specification DPH8920 DPH8909
Input 20-110 V DC 20-110 V DC
Output voltage 0-96 V 0-96 V
Output current 0-20 A 0-9.6 A
Output power 0-1920 W 0-921.6 W
Current resolution 10 mA 1 mA

Compare the current class at your working voltage

Compare DPH8920 for loads requiring the 20 A current class. Its published current resolution is 10 mA. Check both the required current and the control increment when choosing a module for the load.

Use the required voltage and load current to calculate output power. The examples below compare those operating points with each model's published current and power ranges.

Requested output Calculated output power DPH8909 DPH8920
24 V at 2 A 48 W Within 9.6 A and 921.6 W limits Within 20 A and 1920 W limits
48 V at 8 A 384 W Within 9.6 A and 921.6 W limits Within 20 A and 1920 W limits
48 V at 15 A 720 W Exceeds the 9.6 A current limit Within 20 A and 1920 W limits

These are calculated selection examples. Establish the available output with the actual DC source, load, wiring and cooling. The source must maintain the required voltage while supplying the load power plus conversion losses.

The manual specifies a 20–110 V DC input, at least 0.5 V above the output. A 48 V output therefore requires at least 48.5 V at the input. A 96 V output requires at least 96.5 V, within the 110 V input limit. JUNTEK DPH8900-series manual, specifications and operating instructions.

Shared Series Specifications

Power effect CV <0.5% + 10 mV; CC <1% + 5 mA
Load effect CV <0.5% + 10 mV; CC <1% + 5 mA
Output ripple <50 mVpp at 40 V input, 12 V output, 7 A
Typical efficiency 92% at 40 V input, 30 V output, 7 A
Output error Voltage ±2‰ + 1 character; current ±5‰ + 2 characters
Response time <50 ms
RF details for RF variants 2.4 G; 10 m communication distance under the specified accessible condition; channels 01-30; addresses 00-99
Wireless-controller display for RF kits 2.4-inch LCD
Memory 10 parameter groups, M0-M9
Protection PT over-temperature protection
Cooling Onboard radiator and fan cooling
Operating frequency Up to 150 kHz
Minimum voltage difference 0.5 V
Programmable limits Voltage and current limits; temperature-controlled fan and over-temperature output shutdown
Use environment Indoor use; confirm the operating-humidity limit for the installation
Wireless-controller dimensions 120 × 80 × 37 mm
Product dimensions 150 × 120 × 59 mm
Package dimensions 210 × 150 × 75 mm
Net / gross weight 690 g / 800 g

Before Ordering

  • Select the DPH8920, DPH8920-RF, DPH8920-485, or DPH8920-485RF variant according to the required communication method.
  • Confirm the DC input source, wiring components, software compatibility, and package contents for the selected variant.
  • Size the input source and cooling for the intended output rather than assuming all maximum ratings are simultaneous.
  • Compare other DC and AC-input products in the power supply collection.

Plan the host connection and complete configuration

Request a DPH8920 configuration check with your source voltage and power, required output voltage and current, adjustment-step requirement, host port and RF-controller requirement.

Compare the available DC input and output ranges in the programmable DC power supply module collection.