LCR Meter TK2817 with 11 Test Frequencies to 100 kHz
LCR Meter TK2817 with 11 Test Frequencies to 100 kHz - TK2817 Free standard shipping to supported destinations. See the shipping policy for preparation and transit estimates.
Need help choosing? Tell us what you need to measure.
Shipping & returns
Shipping & returns
Free standard shipping is available to supported destinations. Delivery time includes order preparation and transit and varies by destination. See our shipping policy for current delivery estimates and availability.
See our return policy for return conditions. For an order-specific delivery question, contact Mcooh.
LCR Meter TK2817 with 11 Test Frequencies to 100 kHz - TK2817 Free standard shipping to supported destinations. See the shipping policy for preparation and transit estimates.
Choosing the right instrument?
Tell us your measurement range, material or target, and operating conditions.
Description
Description
The Testkey TK2817 LCR meter offers 11 discrete test frequencies from 50 Hz to 100 kHz for component measurements. It measures inductance, capacitance, resistance and impedance, with dissipation factor, quality factor, phase and DC resistance functions. Selectable test levels and series or parallel equivalent circuits help match the measurement setup to the component being checked.
Select one of the stated fixed frequencies and an AC signal level appropriate to the component. L, C and impedance spans below describe the display ranges.
Technical specifications
| Specification | Value |
|---|---|
| Fixed test frequencies | 50, 60, 100, 120 Hz, 1, 10, 16, 20, 40, 50, 100 kHz |
| Basic accuracy | LCRZ 0.1% basic, DCR 0.1% basic |
| AC signal level settings | 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1 V RMS |
| DC signal level | 1 V |
| Measured parameters | L, C, R, |Z|, D, Q, phase, Vm, Im, Δ%, DCR |
| Source output impedance | 30 Ω / 100 Ω |
| Test connection | Four BNC terminals labelled HCUR, HPOT, LPOT and LCUR |
| Measurement time (FAST / MED / SLOW) | ≈19 / 83 / 333 ms |
| Impedance / resistance / reactance display span | 0.00001 Ω–99.9999 MΩ |
| Capacitance display span | 0.00001 pF–9.99999 F |
| Inductance display span | 0.00001 µH–99.9999 kH |
| DCR display span | 0.00001 Ω–99.9999 MΩ |
| Equivalent circuit / ranging | Series or parallel, automatic or hold |
| Fixture correction | Open, short and load calibration |
| List scan / sorting | 10 list points, 10-bin sorting |
| Standard interfaces | USB HOST, USB DEVICE, RS232C, HANDLER |
| Optional interfaces | RS485, GPIB |
| Included Kelvin connection | TSK202 Kelvin test clip |
| Other included test accessories | TSK203 Kelvin test fixture, TSK200 shorting plate |
| Included mains cord | TSK107 AC mains cord |
| Overall dimensions (W × H × D) | 258 × 110 × 300 mm |
| Net weight | 2.35 kg |
Chassis reference dimensions are 213 × 87 × 270 mm (W × H × D).
Use open, short and load correction with the selected test fixture.
Internal, manual, external and bus triggering are available.
The instrument stores 40 setups internally and supports USB storage for setup and CSV measurement files.
USB storage also supports GIF screenshots.
Frequency selection offers 11 discrete values. The ten-point list scan organizes selected measurement conditions.
Accuracy and usable component ranges depend on frequency, signal level, fixture and test conditions.
RS485 and GPIB are optional interfaces.
Included equipment
- TK2817 LCR meter
- TSK107 three-wire power cord
- TSK202 Kelvin test clip
- TSK203 test fixture
- TSK200 shorting bar
Browse LCR Meters to compare related instruments.
